If you’ve not used a printer before, or you’re not getting the results you need from your printer right now, no course in the world can help you with your prints better than this one. Every single element of your 3D printer and how to use it is explained, step by step.

Your instructor Adam will detail every part of your printer, and take you through our honed strategy to ensure reliable printing. He’s going to take care of you, leaving no stone unturned.

This course is structured into 6 modules, each broken down into 3-5 easily digestible lessons ranging from 10-20 minutes long so you can follow along easily in order. 

Starting at bed levelling and getting perfect adhesion, how to choose temperatures and cooling for various materials and types of prints, all the way through to optimising your prints once they’re already looking pretty good. It truly is the full stack.

And if you do need to troubleshoot at the end (also covered) you’ll have a much easier time of things because you know everything was already set up correctly. You’ll be building on a solid foundation instead of forever trying to clean up mistakes you didn’t realise you’d made if you’d tried to learn all this stuff the “traditional” way. 

Enter your first name and email to get access:

If you’ve not used a printer before, or you’re not getting the results you need from your printer right now, no course in the world can help you with your prints better than this one. Every single element of your 3D printer and how to use it is explained, step by step.

Your instructor Adam will detail every part of your printer, and take you through our honed strategy to ensure reliable printing. He’s going to take care of you, leaving no stone unturned.

This course is structured into 6 modules, each broken down into 3-5 easily digestible lessons ranging from 10-20 minutes long so you can follow along easily in order. 

Starting at bed levelling and getting perfect adhesion, how to choose temperatures and cooling for various materials and types of prints, all the way through to optimising your prints once they’re already looking pretty good. It truly is the full stack.

And if you do need to troubleshoot at the end (also covered) you’ll have a much easier time of things because you know everything was already set up correctly. You’ll be building on a solid foundation instead of forever trying to clean up mistakes you didn’t realise you’d made if you’d tried to learn all this stuff the “traditional” way. 

Enter your first name and email to get access:

If you’ve not used a printer before, or you’re not getting the results you need from your printer right now, no course in the world can help you with your prints better than this one. Every single element of your 3D printer and how to use it is explained, step by step.

Your instructor Adam will detail every part of your printer, and take you through our honed strategy to ensure reliable printing. He’s going to take care of you, leaving no stone unturned.

This course is structured into 6 modules, each broken down into 3-5 easily digestible lessons ranging from 10-20 minutes long so you can follow along easily in order. 

Starting at bed levelling and getting perfect adhesion, how to choose temperatures and cooling for various materials and types of prints, all the way through to optimising your prints once they’re already looking pretty good. It truly is the full stack.

And if you do need to troubleshoot at the end (also covered) you’ll have a much easier time of things because you know everything was already set up correctly. You’ll be building on a solid foundation instead of forever trying to clean up mistakes you didn’t realise you’d made if you’d tried to learn all this stuff the “traditional” way. 

If you’ve not used a printer before, or you’re not getting the results you need from your printer right now, no course in the world can help you with your prints better than this one. Every single element of your 3D printer and how to use it is explained, step by step.

Your instructor Adam will detail every part of your printer, and take you through our honed strategy to ensure reliable printing. He’s going to take care of you, leaving no stone unturned.

This course is structured into 6 modules, each broken down into 3-5 easily digestible lessons ranging from 10-20 minutes long so you can follow along easily in order. 

Starting at bed levelling and getting perfect adhesion, how to choose temperatures and cooling for various materials and types of prints, all the way through to optimising your prints once they’re already looking pretty good. It truly is the full stack.

And if you do need to troubleshoot at the end (also covered) you’ll have a much easier time of things because you know everything was already set up correctly. You’ll be building on a solid foundation instead of forever trying to clean up mistakes you didn’t realise you’d made if you’d tried to learn all this stuff the “traditional” way. 

Sometimes you can have all the information you need to hand, but you feel stuck, or an unexpected problem arises or maybe, you’d just like a second opinion from someone whose done it all before.

I completely get that, I’m still learning every day and having someone to just ask quickly and bounce ideas around with is probably the single biggest aspect of my success with it all to date. I need that feedback from those who have different experiences to me, to keep my learning on point.

So allow me to introduce my team of in-house 3D printing experts, who have years of practical experience that they’re eager to share with you, as and when you need it.

While we can’t pretend that they know absolutely everything about 3D printing, the software, techniques and related projects, their breath and depth of technical knowledge and their ability to explain it all simply, is unrivalled and frankly hugely impressive. 

It’s kinda hard to explain, but it’s the sort of battle hardened knowledge that when you start to ask a question, they usually just get exactly what it is you’re referring to half way through, and they’re invariably spot on with their answer. 

It’s so refreshing to speak to people like that, especially if you’re used to those “copy and paste” gurus who’ve simply seen or heard something someone else say and pedal it forward just to make them seem smart. 

It’s safe to say our team will always give you clarity on your projects, they’ll tell you what you need to hear, not what you want to hear. They’ve been through it all before, so why feel like you need to reinvent the wheel? 

If you have a question or get stuck at any point just shoot them your questions or thoughts and they’ll be happy to help. Simple.

What’s more, they’re not just vast information storing robots - they actually care about your success and your projects, so they’ll work with you to figure things out. They’re the friendly faces you can depend on, and before long you’ll probably start to wish you had mentors like these in loads of other areas of your life, too.

Note: All members can see posts and responses, only paying members can post.

Sometimes you can have all the information you need to hand, but you feel stuck, or an unexpected problem arises or maybe, you’d just like a second opinion from someone whose done it all before.

I completely get that, I’m still learning every day and having someone to just ask quickly and bounce ideas around with is probably the single biggest aspect of my success with it all to date. I need that feedback from those who have different experiences to me, to keep my learning on point.

So allow me to introduce my team of in-house 3D printing experts, who have years of practical experience that they’re eager to share with you, as and when you need it.

While we can’t pretend that they know absolutely everything about 3D printing, the software, techniques and related projects, their breath and depth of technical knowledge and their ability to explain it all simply, is unrivalled and frankly hugely impressive. 

It’s kinda hard to explain, but it’s the sort of battle hardened knowledge that when you start to ask a question, they usually just get exactly what it is you’re referring to half way through, and they’re invariably spot on with their answer. 

It’s so refreshing to speak to people like that, especially if you’re used to those “copy and paste” gurus who’ve simply seen or heard something someone else say and pedal it forward just to make them seem smart. 

It’s safe to say our team will always give you clarity on your projects, they’ll tell you what you need to hear, not what you want to hear. They’ve been through it all before, so why feel like you need to reinvent the wheel? 

If you have a question or get stuck at any point just shoot them your questions or thoughts and they’ll be happy to help. Simple.

What’s more, they’re not just vast information storing robots - they actually care about your success and your projects, so they’ll work with you to figure things out. They’re the friendly faces you can depend on, and before long you’ll probably start to wish you had mentors like these in loads of other areas of your life, too.

Note: All members can see posts and responses, only paying members can post.

Sometimes you can have all the information you need to hand, but you feel stuck, or an unexpected problem arises or maybe, you’d just like a second opinion from someone whose done it all before.

I completely get that, I’m still learning every day and having someone to just ask quickly and bounce ideas around with is probably the single biggest aspect of my success with it all to date. I need that feedback from those who have different experiences to me, to keep my learning on point.

So allow me to introduce my team of in-house 3D printing experts, who have years of practical experience that they’re eager to share with you, as and when you need it.

While we can’t pretend that they know absolutely everything about 3D printing, the software, techniques and related projects, their breath and depth of technical knowledge and their ability to explain it all simply, is unrivalled and frankly hugely impressive. 

It’s kinda hard to explain, but it’s the sort of battle hardened knowledge that when you start to ask a question, they usually just get exactly what it is you’re referring to half way through, and they’re invariably spot on with their answer. 

It’s so refreshing to speak to people like that, especially if you’re used to those “copy and paste” gurus who’ve simply seen or heard something someone else say and pedal it forward just to make them seem smart. 

It’s safe to say our team will always give you clarity on your projects, they’ll tell you what you need to hear, not what you want to hear. They’ve been through it all before, so why feel like you need to reinvent the wheel? 

If you have a question or get stuck at any point just shoot them your questions or thoughts and they’ll be happy to help. Simple.

What’s more, they’re not just vast information storing robots - they actually care about your success and your projects, so they’ll work with you to figure things out. They’re the friendly faces you can depend on, and before long you’ll probably start to wish you had mentors like these in loads of other areas of your life, too.

Note: All members can see posts and responses, only paying members can post.

Enter your first name and email for 30 day free access:
 

No contracts. No card details.

Sometimes you can have all the information you need to hand, but you feel stuck, or an unexpected problem arises or maybe, you’d just like a second opinion from someone whose done it all before.

I completely get that, I’m still learning every day and having someone to just ask quickly and bounce ideas around with is probably the single biggest aspect of my success with it all to date. I need that feedback from those who have different experiences to me, to keep my learning on point.

So allow me to introduce my team of in-house 3D printing experts, who have years of practical experience that they’re eager to share with you, as and when you need it.

While we can’t pretend that they know absolutely everything about 3D printing, the software, techniques and related projects, their breath and depth of technical knowledge and their ability to explain it all simply, is unrivalled and frankly hugely impressive. 

It’s kinda hard to explain, but it’s the sort of battle hardened knowledge that when you start to ask a question, they usually just get exactly what it is you’re referring to half way through, and they’re invariably spot on with their answer. 

It’s so refreshing to speak to people like that, especially if you’re used to those “copy and paste” gurus who’ve simply seen or heard something someone else say and pedal it forward just to make them seem smart. 

It’s safe to say our team will always give you clarity on your projects, they’ll tell you what you need to hear, not what you want to hear. They’ve been through it all before, so why feel like you need to reinvent the wheel? 

If you have a question or get stuck at any point just shoot them your questions or thoughts and they’ll be happy to help. Simple.

What’s more, they’re not just vast information storing robots - they actually care about your success and your projects, so they’ll work with you to figure things out. They’re the friendly faces you can depend on, and before long you’ll probably start to wish you had mentors like these in loads of other areas of your life, too.

The perfect accompaniment for the core course, each masterclass hosted by either Steve or Denis covers a specific topic in exact and truly unparalleled levels of detail. 

You get all the experience based theory in the core course, so that you can understand how every part of 3D printing relates to each other. And these skills based masterclasses follow on from that to give the hyper practical side to printing.

That means the instructors show you exactly what they’d do if they came out to optimise a certain aspect of your printer or prints. All you have to do is watch and follow along with your machine. It couldn’t be easier. 

Every question you could have is answered as you watch. The instructors assume nothing, and leave no viewer behind. And in the event you do have questions, you can ask them directly to clarify something. Where else online ensures you get answers to all your questions as you learn?

Where necessary, each masterclass is also segmented into the specific slicer you’re using, so you don’t have to watch any content that’s not relevant to you. 

Each masterclass episode is like a concentrated 20-35 minute shot of fascinating and usable 3D printing knowledge, packed with little-known tips and hacks. 3D Printing will feel like second nature after watching just a few of these. 

We release a brand new masterclass each month, when you join you’ll get instant access to a few already and every new one will add to your 3D printing skillset. 

Enter your first name and email to get access:

The perfect accompaniment for the core course, each masterclass hosted by either Steve or Denis covers a specific topic in exact and truly unparalleled levels of detail. 

You get all the experience based theory in the core course, so that you can understand how every part of 3D printing relates to each other. And these skills based masterclasses follow on from that to give the hyper practical side to printing.

That means the instructors show you exactly what they’d do if they came out to optimise a certain aspect of your printer or prints. All you have to do is watch and follow along with your machine. It couldn’t be easier. 

Every question you could have is answered as you watch. The instructors assume nothing, and leave no viewer behind. And in the event you do have questions, you can ask them directly to clarify something. Where else online ensures you get answers to all your questions as you learn?

Where necessary, each masterclass is also segmented into the specific slicer you’re using, so you don’t have to watch any content that’s not relevant to you. 

Each masterclass episode is like a concentrated 20-35 minute shot of fascinating and usable 3D printing knowledge, packed with little-known tips and hacks. 3D Printing will feel like second nature after watching just a few of these. 

We release a brand new masterclass each month, when you join you’ll get instant access to a few already and every new one will add to your 3D printing skillset. 

Enter your first name and email to get access:

The perfect accompaniment for the core course, each masterclass hosted by either Steve or Denis covers a specific topic in exact and truly unparalleled levels of detail. 

You get all the experience based theory in the core course, so that you can understand how every part of 3D printing relates to each other. And these skills based masterclasses follow on from that to give the hyper practical side to printing.

That means the instructors show you exactly what they’d do if they came out to optimise a certain aspect of your printer or prints. All you have to do is watch and follow along with your machine. It couldn’t be easier. 

Every question you could have is answered as you watch. The instructors assume nothing, and leave no viewer behind. And in the event you do have questions, you can ask them directly to clarify something. Where else online ensures you get answers to all your questions as you learn?

Where necessary, each masterclass is also segmented into the specific slicer you’re using, so you don’t have to watch any content that’s not relevant to you. 

Each masterclass episode is like a concentrated 20-35 minute shot of fascinating and usable 3D printing knowledge, packed with little-known tips and hacks. 3D Printing will feel like second nature after watching just a few of these. 

We release a brand new masterclass each month, when you join you’ll get instant access to a few already and every new one will add to your 3D printing skillset. 

Enter your first name and email for 30 day free access:

No contracts. No card details.​

The perfect accompaniment for the core course, each masterclass hosted by either Steve or Denis covers a specific topic in exact and truly unparalleled levels of detail. 

You get all the experience based theory in the core course, so that you can understand how every part of 3D printing relates to each other. And these skills based masterclasses follow on from that to give the hyper practical side to printing.

That means the instructors show you exactly what they’d do if they came out to optimise a certain aspect of your printer or prints. All you have to do is watch and follow along with your machine. It couldn’t be easier. 

Every question you could have is answered as you watch. The instructors assume nothing, and leave no viewer behind. And in the event you do have questions, you can ask them directly to clarify something. Where else online ensures you get answers to all your questions as you learn?

Where necessary, each masterclass is also segmented into the specific slicer you’re using, so you don’t have to watch any content that’s not relevant to you. 

Each masterclass episode is like a concentrated 20-35 minute shot of fascinating and usable 3D printing knowledge, packed with little-known tips and hacks. 3D Printing will feel like second nature after watching just a few of these. 

We release a brand new masterclass each month, when you join you’ll get instant access to a few already and every new one will add to your 3D printing skillset. 

The perfect accompaniment for the core course, each masterclass hosted by either Steve or Denis covers a specific topic in exact and truly unparalleled levels of detail. 

You get all the experience based theory in the core course, so that you can understand how every part of 3D printing relates to each other. And these skills based masterclasses follow on from that to give the hyper practical side to printing.

That means the instructors show you exactly what they’d do if they came out to optimise a certain aspect of your printer or prints. All you have to do is watch and follow along with your machine. It couldn’t be easier. 

Every question you could have is answered as you watch. The instructors assume nothing, and leave no viewer behind. And in the event you do have questions, you can ask them directly to clarify something. Where else online ensures you get answers to all your questions as you learn?

Where necessary, each masterclass is also segmented into the specific slicer you’re using, so you don’t have to watch any content that’s not relevant to you. 

Each masterclass episode is like a concentrated 20-35 minute shot of fascinating and usable 3D printing knowledge, packed with little-known tips and hacks. 3D Printing will feel like second nature after watching just a few of these. 

We release a brand new masterclass each month, when you join you’ll get instant access to a few already and every new one will add to your 3D printing skillset. 

The Slicer is the software you use to tell your printer how to print the 3D model you want. This is where all the magic happens, so it’s important you a) use the right Slicer for what you want to achieve and b) understand how to use all the features correctly to get the result you wanted.

This course was something our first members had been crying out for, and after a lot of planning they’ve been thrilled at what our in-house Slicer masters Susi and Dave have delivered. 

There is nothing available that even comes close to the detail of training offered in this course.

While getting your printer to be simply “click and print” reliable happens mostly with correct printer setup, this course is the missing link to take your printing to the next level. 

You’ll unlock all the clever abilities you didn’t even know about. And don’t worry, we’ll also let you what we honestly feel are just gimmicks that you can ignore. 

That’s because The Institute of 3D Printing isn’t about dumping as much knowledge we can find on you, it’s about getting you up to “printing is second nature” level in a simple, fast way so you can spend more time enjoying what you print, with who you love. 

To call it just one course doesn't do it justice, because each of the big 3 are broken down into easily digestible Basic, Advanced and Expert stages, so you can jump in at your level. The big 3 slicers are Cura (free), Prusa Slicer (free) and Simplify3D (paid). For 99% of printing Cura and Prusa Slicer are perfect for the job. 

With some Slicers packing over 400 features (and counting with continual updates) this course is the perfect antidote to overwhelm. With new content updated when we can as new Slicer updates are released.

Enter your first name and email to get access:

The Slicer is the software you use to tell your printer how to print the 3D model you want. This is where all the magic happens, so it’s important you a) use the right Slicer for what you want to achieve and b) understand how to use all the features correctly to get the result you wanted.

This course was something our first members had been crying out for, and after a lot of planning they’ve been thrilled at what our in-house Slicer masters Susi and Dave have delivered. 

There is nothing available that even comes close to the detail of training offered in this course.

While getting your printer to be simply “click and print” reliable happens mostly with correct printer setup, this course is the missing link to take your printing to the next level. 

You’ll unlock all the clever abilities you didn’t even know about. And don’t worry, we’ll also let you what we honestly feel are just gimmicks that you can ignore. 

That’s because The Institute of 3D Printing isn’t about dumping as much knowledge we can find on you, it’s about getting you up to “printing is second nature” level in a simple, fast way so you can spend more time enjoying what you print, with who you love. 

To call it just one course doesn't do it justice, because each of the big 3 are broken down into easily digestible Basic, Advanced and Expert stages, so you can jump in at your level. The big 3 slicers are Cura (free), Prusa Slicer (free) and Simplify3D (paid). For 99% of printing Cura and Prusa Slicer are perfect for the job. 

With some Slicers packing over 400 features (and counting with continual updates) this course is the perfect antidote to overwhelm. With new content updated when we can as new Slicer updates are released.

Enter your first name and email to get access:

The Slicer is the software you use to tell your printer how to print the 3D model you want. This is where all the magic happens, so it’s important you a) use the right Slicer for what you want to achieve and b) understand how to use all the features correctly to get the result you wanted.

This course was something our first members had been crying out for, and after a lot of planning they’ve been thrilled at what our in-house Slicer masters Susi and Dave have delivered. 

There is nothing available that even comes close to the detail of training offered in this course.

While getting your printer to be simply “click and print” reliable happens mostly with correct printer setup, this course is the missing link to take your printing to the next level. 

You’ll unlock all the clever abilities you didn’t even know about. And don’t worry, we’ll also let you what we honestly feel are just gimmicks that you can ignore. 

That’s because The Institute of 3D Printing isn’t about dumping as much knowledge we can find on you, it’s about getting you up to “printing is second nature” level in a simple, fast way so you can spend more time enjoying what you print, with who you love. 

To call it just one course doesn't do it justice, because each of the big 3 are broken down into easily digestible Basic, Advanced and Expert stages, so you can jump in at your level. The big 3 slicers are Cura (free), Prusa Slicer (free) and Simplify3D (paid). For 99% of printing Cura and Prusa Slicer are perfect for the job. 

With some Slicers packing over 400 features (and counting with continual updates) this course is the perfect antidote to overwhelm. With new content updated when we can as new Slicer updates are released.

Enter your first name and email for 30 day free access:

No contracts. No card details.

The Slicer is the software you use to tell your printer how to print the 3D model you want. This is where all the magic happens, so it’s important you a) use the right Slicer for what you want to achieve and b) understand how to use all the features correctly to get the result you wanted.

This course was something our first members had been crying out for, and after a lot of planning they’ve been thrilled at what our in-house Slicer masters Susi and Dave have delivered. 

There is nothing available that even comes close to the detail of training offered in this course.

While getting your printer to be simply “click and print” reliable happens mostly with correct printer setup, this course is the missing link to take your printing to the next level. 

You’ll unlock all the clever abilities you didn’t even know about. And don’t worry, we’ll also let you what we honestly feel are just gimmicks that you can ignore. 

That’s because The Institute of 3D Printing isn’t about dumping as much knowledge we can find on you, it’s about getting you up to “printing is second nature” level in a simple, fast way so you can spend more time enjoying what you print, with who you love. 

To call it just one course doesn't do it justice, because each of the big 3 are broken down into easily digestible Basic, Advanced and Expert stages, so you can jump in at your level. The big 3 slicers are Cura (free), Prusa Slicer (free) and Simplify3D (paid). For 99% of printing Cura and Prusa Slicer are perfect for the job. 

With some Slicers packing over 400 features (and counting with continual updates) this course is the perfect antidote to overwhelm. With new content updated when we can as new Slicer updates are released.

The Slicer is the software you use to tell your printer how to print the 3D model you want. This is where all the magic happens, so it’s important you a) use the right Slicer for what you want to achieve and b) understand how to use all the features correctly to get the result you wanted.

This course was something our first members had been crying out for, and after a lot of planning they’ve been thrilled at what our in-house Slicer masters Susi and Dave have delivered. 

There is nothing available that even comes close to the detail of training offered in this course.

While getting your printer to be simply “click and print” reliable happens mostly with correct printer setup, this course is the missing link to take your printing to the next level. 

You’ll unlock all the clever abilities you didn’t even know about. And don’t worry, we’ll also let you what we honestly feel are just gimmicks that you can ignore. 

That’s because The Institute of 3D Printing isn’t about dumping as much knowledge we can find on you, it’s about getting you up to “printing is second nature” level in a simple, fast way so you can spend more time enjoying what you print, with who you love. 

To call it just one course doesn't do it justice, because each of the big 3 are broken down into easily digestible Basic, Advanced and Expert stages, so you can jump in at your level. The big 3 slicers are Cura (free), Prusa Slicer (free) and Simplify3D (paid). For 99% of printing Cura and Prusa Slicer are perfect for the job. 

With some Slicers packing over 400 features (and counting with continual updates) this course is the perfect antidote to overwhelm. With new content updated when we can as new Slicer updates are released.