With just one 3D printed product...
Last month I did $16,000 in sales...
Thank you for passing on what you have learned to others. Lives are really and profoundly being changed by your workshop."
Jim Fehr
Innovative Product Accelerator Client
Do you feel like you could run your own business selling 3D printed products?
Maybe you already are and just need to increase sales...
Enter Your Details Below To Get Access:
Hear From Others Who Joined & Learned:
Here's What You'll Learn:
Why you don’t need to print big, expensive items to make seriously good money 3D printing - the best niches are usually small, high-profit “specific” products that don’t take long to print.
Seven 3D printed products you could be printing right now - PDF sent after full training
We’ll reveal the three key problems preventing your business from 6-figure profitability - (and three easy solutions to tearing down that wall.)
Why hardly anyone buys the cheap, “gimmicky” 3D printed items you’re used to seeing, and instead how to find real 3D printable products you should be making where 3D printing is actually the best way to grow your business right now.
The absolute worst strategy for growing your 3D printing based business that most people start with… and what to tune in on instead…
How more printers, higher spec machines or other workshop gadgets can actually dilute your efforts and decrease profitability.
What happens when you only sell "trending" products and why it’s an extremely fragile long-term plan.
The highly effective way to sell & scale your 3D printing products, building momentum to create consistent revenue and end feast or famine months in your business.
⏰ Don’t miss this training to get the skills to grow your 3D printing based business today!
A bit skeptical? Makes sense.
Here's how we've helped others who were struggling to grow their profits from 3D printing:
Here's Jim's story - before working with Ed (your training host) he didn't have a profitable product to sell.
After a few weeks, he'd found a profitable product that no one else was making, costing just $2 to print & selling for $20 each.
And a few short months later, he was doing $16,000 USD per month, with just that one 3D printed product! This is what he had to say…
Here's what program graduate Peter had to say:
Here's What Other's Have Said About Ed Helping Them Grow Their 3D Printing Business:
I would most certainly recommend this course to anyone who is looking to sell their own 3D printed products.
The biggest take-away for me from the course itself, was the method in which Ed teaches product ideation and keyword research...what Ed teaches is a multifaceted, multi-level approach, in where you can actually generate ideas based off of the type of keyword research that you do...
I managed to come up with multiple product ideas which I would never have come across even though I was already interested in that niche... It's been great to work with Ed, he really does get down into detail with you. He chases you up on the actionable items and feedback to get you to where you need to be.
Lives are really and profoundly being changed by your workshop
I think sales have been way beyond what I expected!
My wife even said a few days ago "I was skeptical, but he didn't lie." Still so much to figure out but I feel like I'm on my way. Thanks for passing on what you have learned to others.
Thanks Ed
I understand that false sense when looking at X number of items on the print bed(s) and then look further into the cost breakdowns and see little to no profit.
Looking forward to exploring that "niche" and taking my skills further.
Fantastic video Ed
Great analysis of the psychology of being pre-occupied with the dopamine rush of printing lots, without analyzing and optimizing.
It makes so much sense to focus on smaller, hidden markets instead of the ultra-popular stuff that will die out eventually.
Love the idea of making the FAQs an additional selling point!
Have always found these very boring to write and completely overlooked the fact they could be used to promote the product and answer questions the customer didn't know they had.
About Your Host:
After years helping businesses with their 3D printed products, Ed wants to help others find in-demand 3D printed items that make great money, so you can finally build a business that serves you.
After successfully grown multiple businesses creating and selling physical products and been featured in 3D printing publications (such as 3D Printing Industry, 3DPrint.com & All3DP, to name a few) - there’s no one more qualified to help you generate solid income using your 3D printers.
NEED HELP? WE GOT YOU COVERED!
FREQUENTLY ASKED QUESTIONS
If you have any other questions you'd like us to answer before you register, open a ticket or email success@io3dp.com.
The training is about 1 hour in length.
If you stay until the end, you'll also get a PDF download including 7 products you could be selling right now.
We've detailed some of what's included further up this page.
Ed will be discussing his revolutionary way to find and sell highly profitable 3D printed products, including examples of those he's helped.
This training is perfect for those already selling but struggling to move the needle to secure profits. You may not even be selling 3D prints yet, but have access to a 3D printer and a history in business.
Anyone interested in running their own e-commerce business can benefit from this training.
No payment details will be requested during this training.
The only thing we ask from you to access this training is your registration details so we can send you your unique link and PDF downloads.
Towards the end of the training, Ed will offer you potential next moves for your business if you'd like to learn more from him after the training, but the choice is at all times your own.
We have increased the sessions for today's limited training as we had previously only had one available for other trainings.
If you still cannot make the sessions available, we're sorry to say we can't guarantee it will be accessible again.
If you are interested, we would suggest registering still, in case you are able to make it nearer the time.
Ed has had many e-commerce businesses that he has grown to 6-figures, but has found a passion for teaching what he has learnt.
He is no stranger to running the nitty-gritty parts of a business, but is keen to make it easier for others than the struggles he's had to face.
Ed's passion for teaching is what drives him. He's released multiple free trainings over the years and hopes to continue to do so in the future to help those drowning in the e-commerce confusion pool.
He does offer more in-depth training to select entrepreneurs and is always looking for those who this would suit.
Ed has spent his entire life running businesses, which has allowed him to perfect his revolutionary methods behind growing successful businesses. His teachings are not based on something that has only worked once, or only worked for him. It is a collation of finely tuned steps based on his and his clients' experiences and success. This allows him to prevent you making the same mistakes he and many others do, when growing their businesses.
© Copyrights by Institute of 3D Printing, trading name of rigid.ink Ltd. All Rights Reserved.