Free Giveaway - Limited Time Only! ⏰
Get Your FREE 3D Printing Cause & Effect Checklist
Discover what affects what with your 3D prints. Finally get the link between the issue with your print and the setting with your slicer or problem with your printer.
-
Stop tinkering and save a TON of time!
-
Download to keep and read at your leisure.
-
Instant download emailed to you.
100% No sharing or spam
It's as easy as 1, 2, 3!
3D Printer Setup
-
E-steps & Flow Rate
Learn what needs checking so you can improve layer adhesion & print quality.
-
Ghosting
Banish ghosting from your prints without having to take the entire printer apart, we'll tell you what to check.
-
Z-Gap
Yes this is a thing, and you want the correct level of "squish".
-
Prints warping or not even sticking
Ouch. Feel like you're failing right at the start? There's no need just read the checklist for what's going wrong.
Materials/Filament
-
How much should you be paying?
There's an entire market out there (trust us we were part of it as rigid.ink Ltd) but how much should you be paying for your filament?
-
Printer jams
One of the most frustrating things you can experience is a jam part-way through your print, or typically around 75% complete! Stop this forever with the 5 Pillars Checklist.
-
Profile Vs Material
Choices choices! Did you know picking the wrong material or profile can damage your printer not only that print? It's one of the most vital checks you should be doing.
-
Pop! Pop! Pop!
The dreaded popping! If you've never had the pleasure of hearing your printer sound like a popcorn machine you're one of the lucky few. Find out what it means and much more...
Slicer Settings
-
Print Speed
Completely in your control but what's the ideal speed? Don't overthink it, let the checklist tell you today.
-
Layer Height
Small? Thin? Lacking detail? Adaptive? It depends on the finish you want but don't get stuck guessing.
-
Infill Percentage
The key is finding the correct balance for your print but for that you need to know what it affects.
-
Cooling
Often a forgotten feature but one that needs checking if you don't want a number of issues. Read more about what they are and how to prevent them.
Supports
-
Angles
Check if you even need supports by knowing what angles do and do not.
-
Removal
If you've ever struggled with removing supports you need to read this.
-
Print orientation
Supports aren't the only answer and again it's all about balance!
3D Model
-
Working File
Seems basic but without a working file you're screwed from the start. Learn what to check in the checklist.
-
Air Printing
Something sure to boggle the brain is seeing your printer trying to print layers in thin air. Know what you need to check by reading the 5 Pillars Checklist.
-
Scale/Resolution
Too high or too low? Find out the affects so you can determine which you're experiencing.
★ BONUS ★
-
Optional Upgrades
Learn if you should be upgrading, and if so, what upgrades you can trust.